|
Maxiforce Traffic Control Bollards are available in a variety of different configurations to meet the need of your organization. The body, head, and bases are available in different configurations shown below:
Two basic body styles are available for the MaxiForce Traffic Control Bollards including: Standard and Round. Please view the chart below for the available options for each type of bollard.
 |
 |
- Collapsible Bollards
- Hydrant-wrench Operated Bollard
- Padlock Operated Bollard
- Fixed Bollards
- Removable Bollards
- Hydrant-wrench Operated Bollard
- Padlock Operated Bollard
|
- Fixed Bollards
- Heavy Duty Bollards
- Removable Bollards
- Hydrant-wrench Operated Bollard
- Padlock Operated Bollard
|
5 different head styles are available for your bollard based on the body style you select for your bollard.
The standard style bollard accepts 3 different interchangeable heads so that you can customize the look of the bollard for your decor. Each head is secured with tamper-proof screws.
 |
 |
 |
| Standard Style 1 (SS1) |
Standard Style 2 (SS2) |
Standard Style 3 (SS3) |
The round style bollard accepts 2 different interchangeable heads to allow customization of the look of your bollard. Each head is secured with tamper-proof screws.
 |
 |
| Round Style 1 (RS1) |
Round Style 2 (RS2) |
4 different bases are available for your bollard based upon which bollard you select. The bases include the Universal Base, EZ Base, Simple Base, Removable Base, and the Heavy Duty Base.
|
The universal base can be installed to keep the base flush with surrounding pavement or brick.
It allows you the capability to use either collapsible or removable bollards, so should a change be needed at a later point no base removal would be required. The universal base is larger and heavier than the others and therefore is stronger and provides extra resistance. The top plate is 10” x 10”. Hole requirements are 12” x 12” x 23” deep.
 
Compatible Bollards
- Collapsible Bollards
- Hydrant-wrench Operated Bollard
- Padlock Operated Bollard
- Removable Bollards
- Hydrant-wrench Operated Bollard
- Padlock Operated Bollard
|
If you’re installing a bollard in a place where it is difficult or impossible to dig a hole in the ground, the MaxiForce EZ Base allows you to install our collapsible bollards by only drilling holes into the concrete. The base is secured into the concrete using Epoxy (included). The bollard bolts down to the EZ Base. The top
plate is 6 ¾” x 3”
 
Compatible Bollards
- Collapsible Bollards
- Hydrant-wrench Operated Bollard
- Padlock Operated Bollard
|
|
This base is designed for the collapsible units only. It is simpler and more cost effective than the universal base and requires a smaller hole. The top plate is 6 ¾” x 3”. This unit requires a hole 8” x 8” x 18” deep.
 
Compatible Bollards
- Collapsible Bollards
- Hydrant-wrench Operated Bollard
- Padlock Operated Bollard
|
The removable base is for the all removable units except the HD. It allows for a smaller and simpler base than the universal base. The top plate is 8” x 6”. This unit requires a hole that is 8” x 8” x 20” deep. The lock slot has a cover to keep dirt and concrete out of the slot where the lock hasp will go.
 
Compatible Bollards
- Removable Bollards
- Hydrant-wrench Operated Bollard
- Padlock Operated Bollard
|
|
The HD base is designed to be used with the HD removable only. The HD unit extends its larger bollard body completely into the base. The top plate is 8” x 10”. It requires a hole that is 12” x 12” x 28” deep. The lock slot has a cover to keep dirt and concrete out of the slot where the lock hasp will go
 
Compatible Bollards
|
|
- Return to MaxiForce Traffic Control Bollards
|
ABOUT US | 
